This week, EB-LINK completed a version update of the optical module coding tool, adding compatible templates for radio, television and command center-related equipment based on the codes of many mainstream brands to solve the problem of joint debugging being blocked due to failed port identification.

Why are radio and television projects sensitive to equipment codes?

The signal routing in the studio relies heavily on the SFP port of the access switch. The module's manufacturer information, wavelength and power consumption fields are read and verified by the device. If the writing code does not match, an alarm will be reported at best, and the port will not light up at worst. IP production networkSFP+ 10G single-mode dual-fiber 10km optical moduleIt is widely used and often requires DDM readings on the link; Gigabit access in the scheduling background is based onSFP Gigabit single mode dual fiber 10KM optical moduleMainly, both types of modules are within the writable code range this time.

changes in process

  • When placing an order, register according to the device model and software version. After writing the code, read it back for comparison and confirm that the fields are consistent before packaging.
  • The luminous power, received power and DDM threshold are tested one by one, and the test values ​​are recorded with the batch for easy traceability.
  • The compatibility table is maintained according to device software versions, and differences in verification fields between different versions of the same model will be marked in advance.
  • The project site can first take samples and only light up the ports for verification, and then put them on the shelves in batches to reduce the risk of rework of the entire batch.

What does it mean for integrators?

The joint debugging of the matrix and large screen is most afraid that the port problem will be misjudged as an optical fiber failure, and people will be sent back and forth. Free coding plus delivery of measured data prevents such disputes in the warehouse in advance. You only need to pick up pairs of modules according to the list on site. The Wolflight technical support team will respond on working days. If you need to check the compatibility table according to the device list, you can call 0755-83179002 to explain the model and software version.