The switch has an identification mechanism for third-party optical modules. Writing code means writing the module information area into content acceptable to the corresponding brand. All EB-LINK optical modules support free coding according to mainstream brands such as Cisco, Huawei, H3C, ZTE, and Ruijie. To make good use of this service, remember the three steps in the process.

Reporting the model and brand is the prerequisite for writing codes

When consulting, please report the brand and specific model of the equipment at both ends at the same time, rather than just mentioning the brand. The identification strategies of different models of the same brand may be different. Technical support will check the code library according to the model and provide an adaptation plan.SFP Gigabit single mode dual fiber 10KM optical moduleThe number database for this type of commonly used models has relatively complete coverage. It is recommended to confirm first before placing an order for unpopular models.

Don't skip this step of proofing and confirmation.

Before placing a batch order, take a small amount of samples and install them on the device actually used in the project to verify: whether the port can come up normally, whether there are compatibility alarms, and whether the DDM reading is accurate. After the samples run stably in the real environment, they are then written in batches. The code writing is completed one by one and read back for verification to avoid batch rework.

Verification and records on the day of boarding

After the batch arrives, go on the machine according to the port corresponding table and confirm that the recognition is normal one by one. If individual modules are not recognized, first change the port, cross-check with a module that is known to be normal, and take photos of the device model, module label, and alarm interface and send them to technical support to facilitate remote determination of whether it is a coding problem or a port problem. Long distance links such asSFP 2.5G single mode dual fiber 40KM optical moduleFor applications, the transmitting and receiving luminous power should also be recorded simultaneously and retained as a subsequent baseline.

There is no additional charge for coding customization. If you need to register through 0755-83179002 or email sale01@eb-link.com.cn during working days from 8:30-18:00, you can be queued for processing.